Новый ISPSoft 3

and909
Сообщения: 858
Зарегистрирован: 28 май 2013, 13:20

Re: Новый ISPSoft 3

Сообщение and909 »

pkl писал(а):
23 фев 2022, 21:39
Есть недостатки
У меня такая-же хрень, win10pro

and909
Сообщения: 858
Зарегистрирован: 28 май 2013, 13:20

Re: Новый ISPSoft 3

Сообщение and909 »

Кто знает, где хранятся настройки шрифтов, замучился менять мерзкий Times New Roman на привычный Arial, ползая по меню настройки.

KatranBS
Сообщения: 19
Зарегистрирован: 12 фев 2015, 16:15
Откуда: Минск

Re: Новый ISPSoft 3

Сообщение KatranBS »

pkl писал(а):
23 фев 2022, 21:39
Есть недостатки
Win10x64 Rus - все ок. И таки да, я тоже когда-то корректировал кодовую страницу для русского языка в комментах GX Developer
Вложения
2022-02-24_085147.png
2022-02-24_085147.png (90.78 КБ) 2552 просмотра

KatranBS
Сообщения: 19
Зарегистрирован: 12 фев 2015, 16:15
Откуда: Минск

Re: Новый ISPSoft 3

Сообщение KatranBS »

bayk писал(а):
23 фев 2022, 11:04
вечерком проверю
И как результат? Подтверждается?

bayk
Сообщения: 887
Зарегистрирован: 30 май 2015, 21:20

Re: Новый ISPSoft 3

Сообщение bayk »

затрепали на объектах, в офисе за 3 дня ещё не был.

prolex888
Сообщения: 7
Зарегистрирован: 07 июн 2022, 14:19

Re: Новый ISPSoft 3

Сообщение prolex888 »

Вышла новая версия ISPSoft
Version: 3.16
Date of Publication: May 10, 2022
1. HWCONFIG now support the function card AS-FFTP01.
(available for AS300 with firmware version 1.12.00 or later)
2. HWCONFIG now support the function card AS-FECAT.
(available for AS300 with firmware version 1.12.00 or later)3. Optimized OPC UA variable Table.
(1) Now the new data type boolean (BOOL) is supported.
(2) Now the use of devices X and Y are supported in the addresses of the variables.
(3) Now the addresses of the variables can be designated to the devices automatically.
(4) Now when the address of the variable is a boolean array, the number of the
device M can use numbers that are NOT multiples of sixteen.
(5) Now when the declared variable is a boolean array, the length of declared variable
can use numbers that are NOT multiples of sixteen.
4. Optimized the compiler diagnostic message for C programming language.
No more prompted DOS windows. The compiler diagnostic message for C programming
language is now added in the Compile Message along with the complier diagnostic
messages for other programming languages. If the error message is shown with where the
error occurred (which line), double-click the error message will direct you to where the error
occurred.
5. Newly added instructions
Instruction Model FM Version Model FW Version Model FW Version
ATMR AS300 V1.12.00 AS200 V1.12.00 DVP ES3 V1.06.00
ATMRH AS300 V1.12.00 AS200 V1.12.00 DVP ES3 V1.06.00
ATMRM AS300 V1.12.00 AS200 V1.12.00 DVP ES3 V1.06.00
MLPF AS300 V1.12.00 AS200 V1.12.00
MQTT_Connect AS300 V1.12.00
MQTT_Publish AS300 V1.12.00
MQTT_Subscribe AS300 V1.12.00
Record_Trigger AS300 V1.12.00
INITEC AS300 V1.12.00
ECATRW AS300 V1.12.00
MOTST AS300 V1.12.00
ECATST AS300 V1.12.00
DPUCONF DVP ES2 V4.02 DVP ES2-C V3.80
PUSTAT DVP ES2 V4.02 DVP ES2-C V3.80
DPUPLS DVP ES2 V4.02 DVP ES2-C V3.80DPUDRI DVP ES2 V4.02 DVP ES2-C V3.80
DPUDRA DVP ES2 V4.02 DVP ES2-C V3.80
DPUZRN DVP ES2 V4.02 DVP ES2-C V3.80
DPUJOG DVP ES2 V4.02 DVP ES2-C V3.80
DPUMPG DVP ES2 V4.02 DVP ES2-C V3.80
DPUCNT DVP ES2 V4.02 DVP ES2-C V3.80
PUX DVP ES2 V4.02 DVP ES2-C V3.80
PUXP DVP ES2 V4.02 DVP ES2-C V3.80
DPULS DVP ES2 V4.02 DVP ES2-C V3.80
DPULSP DVP ES2 V4.02 DVP ES2-C V3.80
6. The following issues are fixed and functions are modified:
(1) Upgraded the data length of input and output for EtherNet/IP general device from 500 to
505 byte.
(2) Updated the display rule of Connection Manager in EtherNet/IP data exchange editing
page: Connections not supported will not be presented from the drop-down list of
Connection Manager.
(3) Fixed an issue that the X registers should not be shown in the drop-down list of Adapter
Start Address for AS Series PLC CPU.
(4) Added a new function: The ranges of register addresses in Scanner Start Address / EIP
Tag column will be checked.
(5) DUT.wordVar.1 is supported. The data type, bit, can be used in Word typed variable
under Data Unit Type (DUT).
(6) Optimized online mode for AS Series PLC CPU; multiple POUs can be edited
simultaneously.
(7) After updating in online editing is complete and leaving it for a period of time, a message
will show up. (“Program is modified and you have not updated it on-line. Recover the
program to its status before on-line editing? ”) Since the update is complete, the
message shown to remind users to update the program is not necessary. Removed the
message.
(8) After using the replace function, if there is any change, a window will be prompted to
remind users to compile the program before switching to online mode.
(9) Fixed an issue that if the order of the connected modules is changed, after the project is
saved and closed, the variable table of HWCONFIG and ISPSoft cannot be
synchronized correctly3. Optimized OPC UA variable Table.
(1) Now the new data type boolean (BOOL) is supported.
(2) Now the use of devices X and Y are supported in the addresses of the variables.
(3) Now the addresses of the variables can be designated to the devices automatically.
(4) Now when the address of the variable is a boolean array, the number of the
device M can use numbers that are NOT multiples of sixteen.
(5) Now when the declared variable is a boolean array, the length of declared variable
can use numbers that are NOT multiples of sixteen.
4. Optimized the compiler diagnostic message for C programming language.
No more prompted DOS windows. The compiler diagnostic message for C programming
language is now added in the Compile Message along with the complier diagnostic
messages for other programming languages. If the error message is shown with where the
error occurred (which line), double-click the error message will direct you to where the error
occurred.
5. Newly added instructions
Instruction Model FM Version Model FW Version Model FW Version
ATMR AS300 V1.12.00 AS200 V1.12.00 DVP ES3 V1.06.00
ATMRH AS300 V1.12.00 AS200 V1.12.00 DVP ES3 V1.06.00
ATMRM AS300 V1.12.00 AS200 V1.12.00 DVP ES3 V1.06.00
MLPF AS300 V1.12.00 AS200 V1.12.00
MQTT_Connect AS300 V1.12.00
MQTT_Publish AS300 V1.12.00
MQTT_Subscribe AS300 V1.12.00
Record_Trigger AS300 V1.12.00
INITEC AS300 V1.12.00
ECATRW AS300 V1.12.00
MOTST AS300 V1.12.00
ECATST AS300 V1.12.00
DPUCONF DVP ES2 V4.02 DVP ES2-C V3.80
PUSTAT DVP ES2 V4.02 DVP ES2-C V3.80
DPUPLS DVP ES2 V4.02 DVP ES2-C V3.80DPUDRI DVP ES2 V4.02 DVP ES2-C V3.80
DPUDRA DVP ES2 V4.02 DVP ES2-C V3.80
DPUZRN DVP ES2 V4.02 DVP ES2-C V3.80
DPUJOG DVP ES2 V4.02 DVP ES2-C V3.80
DPUMPG DVP ES2 V4.02 DVP ES2-C V3.80
DPUCNT DVP ES2 V4.02 DVP ES2-C V3.80
PUX DVP ES2 V4.02 DVP ES2-C V3.80
PUXP DVP ES2 V4.02 DVP ES2-C V3.80
DPULS DVP ES2 V4.02 DVP ES2-C V3.80
DPULSP DVP ES2 V4.02 DVP ES2-C V3.80
6. The following issues are fixed and functions are modified:
(1) Upgraded the data length of input and output for EtherNet/IP general device from 500 to
505 byte.
(2) Updated the display rule of Connection Manager in EtherNet/IP data exchange editing
page: Connections not supported will not be presented from the drop-down list of
Connection Manager.
(3) Fixed an issue that the X registers should not be shown in the drop-down list of Adapter
Start Address for AS Series PLC CPU.
(4) Added a new function: The ranges of register addresses in Scanner Start Address / EIP
Tag column will be checked.
(5) DUT.wordVar.1 is supported. The data type, bit, can be used in Word typed variable
under Data Unit Type (DUT).
(6) Optimized online mode for AS Series PLC CPU; multiple POUs can be edited
simultaneously.
(7) After updating in online editing is complete and leaving it for a period of time, a message
will show up. (“Program is modified and you have not updated it on-line. Recover the
program to its status before on-line editing? ”) Since the update is complete, the
message shown to remind users to update the program is not necessary. Removed the
message.
(8) After using the replace function, if there is any change, a window will be prompted to
remind users to compile the program before switching to online mode.
(9) Fixed an issue that if the order of the connected modules is changed, after the project is
saved and closed, the variable table of HWCONFIG and ISPSoft cannot be
synchronized correctly

Алексей29
Сообщения: 113
Зарегистрирован: 17 дек 2020, 12:28
Откуда: Воронеж

Re: Новый ISPSoft 3

Сообщение Алексей29 »

кто-то ставил 3,16?
не запускается установка. скачивал с офф сайта

bayk
Сообщения: 887
Зарегистрирован: 30 май 2015, 21:20

Re: Новый ISPSoft 3

Сообщение bayk »

я качал и ставил и даже прошивался с него. никаких проблем. качал с дклтроникса, но по моему там прямые ссылки на глобал ведут

bayk
Сообщения: 887
Зарегистрирован: 30 май 2015, 21:20

Re: Новый ISPSoft 3

Сообщение bayk »

я качал и ставил и даже прошивался с него. никаких проблем. качал с дклтроникса, но по моему там прямые ссылки на глобал ведут

Aeroplan
Сообщения: 289
Зарегистрирован: 17 окт 2013, 11:39
Откуда: Санкт-Петербург

Re: Новый ISPSoft 3

Сообщение Aeroplan »

Скачал, установил. Прошился. С первого взгляда работает без явных проблем.

Ответить